Krell S-550i Manuel d'utilisateur télécharger pdf

S-550i

Integrated Amplifier

QUICK SETUP GUIDE

Getting Started

THE LEADER IN AUDIO ENGINEERING

Thank you for your purchase of the Krell S-550i Remote Control Integrated

Amplifier. This fully integrated amplifier and preamplifier has a discrete signal

path from input to output and employs a wide bandwidth design with low nega-

tive feedback for sonic accuracy throughout the frequency spectrum. All circuits

up to the driver stage operate in pure Class A.

Krell’s new surface mount technology (SMT) means that the S-550i is an inte-

grated amplifier with big power—275 Watts per channel—that does not require

big space. SMT allows individual circuit elements to be placed very close

together. This shortens signal paths and allows circuit elements to operate at

the same temperature, resulting in more accurate signal transfer and enhanced

reliablilty.

The S-550i is easy to operate and integrate into your system. The remote control

accesses all amplifier functions, and remote control connection options allow the

S-550i to be easily connected with other components. The Theater Throughput

feature provides easy integration of the amplifier into a home theater system.

Do not place the integrated amplifier where it could be exposed to dripping or splashing.

Do not remove or bypass the ground pin on the end of the AC cord. This may cause radio

frequency interference (RFI) to be introduced into your playback system.

The ventilation slots on the top and bottom of the integrated amplifier must be unobstructed

at all times during operation. Do not place flammable material on top of or beneath the com-

ponent.

Turn off all systems’ power before connecting the integrated amplifier to any component.

Make sure all cable terminations are of the highest quality, free from frayed ends, short cir-

cuits, or cold solder joints.

THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.

1. Open the shipping box and remove the top layer of foam. You will see these

items:

2. Carefully remove all items from the shipping box.

3. Place the preamplifier and power supply in a safe location and remove the pro-

tective plastic wrapping.

Place the S-550i on a firm, level surface, away from excessive heat, humidity, or

moisture. The integrated amplifier requires at least one inch (2.54 cm) of clearance

on each side and at least two inches (5 cm) of clearance above to provide ade-

quate ventilation. Installations inside cabinetry may need extra ventilation.

WARNINGS

Krell S-550i 1

Unpacking

Krell Industries, LLC., 45 Connair Road,Orange, CT 06477-3650 USA

TEL 203-799-9954, FAX 203-891-2028, E-MAIL krell@krellonline.com

WEB SITE http://www.krellonline.com

Connecting the

S-550i

to Your System

Because of its powerful amplifier channels and high-capacity power supply, the

S-550i will benefit from a dedicated AC circuit. Avoid connections through exten-

sion cords or multiple AC adapters. High quality 20 amp AC strips are acceptable.

Please contact your authorized Krell dealer, distributor befor using any devices

designed to alter or stabilize the AC power for the S-550i.

Follow these steps to conect the S-550i to your system.

1. Make sure all power sources and components are off before connecting inputs

and outputs.

2. Neatly organize the wiring between the S-550i and all system components.

Separate AC wires from audio cables to prevent hum or other unwanted noises

from being introduced into the system.

3. Connect the left and right loudspeaker cables to the integrated amplifier's left

and right loudspeaker output terminals (14).

4. Connect the left and right outputs of your source components to the appropri-

ate analog inputs (15, 16, 17) on the S-550i.

5. Use the preamp outputs (19) to connect to an additional power amplifier.

6. Plug the AC cord into the IEC connector (22) on the back panel of the S-550i.

Plug the remaining end into the AC wall receptacle. Turn on the Power Breaker

Switch on the rear panel. The red stand-by LED (2) illuminates and the display

shows the software version.

Note

Use only the power cord provided with the S-550i to make the connection to AC power.

Operation with a power cord other than the one supplied by Krell can induce noise, limit cur-

rent, or otherwise impair the ability of the integrated amplifier to perform optimally.

When powering up any system, alway turn amplifiers on last.

When powering down, always turn amplifiers off first.

1. When the amplifier is in stand-by mode, with the red stand-by LED (2) illumi-

nated, turn the amplifier on by pressing the power button on the front panel

or the power key on the remote control (1). There are audible clicks. The blue

power LED (2) illuminates. The S-550i is now in the operational mode.

2. With the amplifier in the mute position, or the volume control fully attenu-

ated, select a source from the front panel or the remote control (4).

3. Start playing the source.

4. Set the volume to a comfortable listening level using the level knob on the

front panel or the level keys on the remote control (7).

5. To turn the amplifier off, press the power button on the front panel or the

power key on the remote control (1). The red stand-by LED (2) illuminates.

It is now safe to turn off the rest of the system.

The balance function allows adjustment of the left and right balance. The options

are: CENTER, L 1-5 dB <, R 1-5 dB >. The remote control has direct (10) keys to make

these adjustments. For front panel adjustment follow the steps listed below.

1. Press the S-550i's menu button (6), then use the level control knob, to select:

BALANCE.

2. Press the level control knob (8). The display shows (9) the default mode: CENTER.

3. Use the level control knob to select the desired balance option from 1 to +5 dB

in 1 dB increments, left or right.

4. Press the level control knob (8) to confirm the selection. The display reads:

BALANCE.

5. Press the MENU button to return to normal operation.

4 Krell S-550i

Operating the S-550i

This product complies with the

EMC directive (89/336/EEC)

and the low-voltage directive

(73/23/EEC).

1 S-550i chassis

1 iPod dock

1 IEC connector (AC power) cord

1 Owner's Reference

1 Remote control

1 T-10 Torx wrench for remote

2 AAA remote batteries

Placement

AC POWER GUIDELINES

MODEL: S-550i Integrated Amplifier SERIAL NUMBER:

Overview

Channel Balance

Adjustment

This CLASS 1 apparatus must

be connected to a MAINS

socket outlet with a protective

earthing connection.

Krell recommends using balanced

interconnect cables. Balanced

interconnect cables not only

can minimize sonic loss but are

also immune to induced noise,

especially with installations using

long cables. Balanced connec-

tions have 6 dB more gain than

single-ended connections. When

level matching is critical, keep this

gain value in mind.

Note

Save all packing materials. If

you need to ship the S-550i in

the future, repack th unit in its

original packaging to prevent

shipping damage.

The owner's reference for this prod-

uct, including a detailed descrip-

tion of features, technologies, and

warranty is available on the web at:

www.krellonline.com

[email protected]

1 2

Résumé du contenu

Page 1 - QUICK SETUP GUIDE

S-550iIntegrated Amplifier QUICK SETUP GUIDEGetting Started THE LEADER IN AUDIO ENGINEERINGThank you for your purchase of the Krell S-550i Remote Co

Page 2 - Back Panel

2 Krell S-550i Krell S-550i 3Figure 1 The S-550i Front PanelFigure 2 The Remote ControlFigure 3 The S-550i Back PanelThis p

Commentaires sur ces manuels

Pas de commentaire

Krell S-550i Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Récepteurs et amplificateurs Krell S-550i. Krell S-550i User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Krell S-550i